![]()
Project Details
Kitchen Renovation
Type Of Project: Kitchen Renovation
Location: Greenhithe, Auckland, North Shore
Year Completed: 2015
A full kitchen renovation completed by our in-house design-and-build team, managed end to end from the first measure through to the final fit-off.
A white handleless kitchen renovation in Greenhithe
This kitchen sits in a Greenhithe home on Auckland’s North Shore, completed by our in-house team in 2015. It is an open-plan kitchen and dining space done in a crisp, low-fuss palette: white high-gloss cabinetry with no handles, a run of warm timber-look wall cabinets above the cooktop, and engineered stone benchtops carried across the island and the main bench.
The layout: an island, a scullery and open-plan dining
The kitchen is built around a central island with a timber-clad end and a white stone top, seated with three upholstered bar stools so it works for cooking and casual company alike. A second bench runs along the wall carrying the gas cooktop and a built-in oven, and a doorway leads through to a separate scullery that keeps small appliances, extra storage and a second sink out of sight of the main room. Wood-look flooring runs through the kitchen and into the dining area, where a rustic timber table anchors the open-plan space.
Materials and finishes
The finishes are what give this kitchen its character. Handleless gloss fronts keep the cabinetry clean and easy to wipe down, the timber-look upper cabinets add warmth against all that white, and a pale glass splashback behind the cooktop reflects light without the grout lines of tiled work. A matte black gooseneck mixer over the undermount double sink is the one deliberate dark note in the room. It reads as a practical, hard-working family kitchen rather than a showpiece.
What goes into a kitchen renovation like this
A kitchen this size touches almost every trade. Cabinetry is measured and made to fit the room, benchtops are templated once the cabinets are in, and plumbing, gas and electrical all have to land in the right place before the splashback and appliances go in. We run this as a single design-and-build job so one team carries it from the first measure to the final fit-off. See the way we design and build a kitchen from measure to fit-off, or the kitchen renovations we take on across the North Shore.
Ventilation is one detail worth getting right in a kitchen with a gas cooktop. New Zealand Building Code clause G4 Ventilation requires household spaces to have adequate ventilation for their use, including removing cooking fumes and the products of combustion from a gas hob. In practice that means sizing extraction to the cooktop and ducting it properly, which is why the rangehood here is built into the run of upper cabinets rather than bolted on afterwards. Gas connections themselves are always made by a licensed gasfitter.
The white engineered stone benchtops are templated to the installed cabinetry and supported on a level, well-fixed carcass, so the joins sit flush and the island overhang stays rigid over years of daily use. If you are weighing up a budget, our kitchen renovation cost calculator gives a quick starting figure, and this kitchen was delivered as part of the wider full-home renovations we deliver on the North Shore.
Where is this kitchen renovation located?
This kitchen renovation is in Greenhithe, on Auckland's North Shore. It was completed by the Superior Renovations in-house design-and-build team in 2015 as an open-plan kitchen and dining space, with a separate scullery off the main room.
What style is this Greenhithe kitchen?
It is a modern, low-fuss kitchen. White handleless high-gloss cabinetry is paired with warm timber-look upper cabinets, engineered stone benchtops, a pale glass splashback and matte black tapware. The island seats three, and the layout opens straight onto the dining area.
How much does a kitchen renovation cost in Auckland?
It depends on the size of the kitchen, the amount of cabinetry, the benchtop material and how much plumbing, gas and electrical work is involved. Rather than quote a single figure, run your numbers through our kitchen renovation cost calculator, or book a consultation so we can scope it properly.
How long does a kitchen renovation take?
Most kitchen renovations run over several weeks once trades are on site, and the timeline is driven mainly by cabinetry lead times and the scope of any structural, plumbing or electrical changes. We map out the programme during design, so you know what to expect before we start on site.
What is a scullery, and does this kitchen have one?
Yes. A scullery is a second, tucked-away prep and storage space off the main kitchen. This Greenhithe home has one through a doorway beside the cooktop run, which keeps small appliances, extra storage and a second sink out of sight of the open-plan living area.
Does a gas cooktop need special ventilation?
Yes. New Zealand Building Code clause G4 Ventilation requires household spaces to have adequate ventilation for their use, including removing cooking fumes and the products of combustion from a gas hob. That means sizing and ducting the rangehood correctly. Gas connections are always made by a licensed gasfitter.
What benchtop is used in this kitchen?
The benchtops are white engineered stone, a hard-wearing quartz-based surface that suits a busy family kitchen. Engineered stone is templated to the installed cabinetry so the joins sit flush and the island overhang stays properly supported.
Do I need council consent for a kitchen renovation?
A like-for-like cosmetic kitchen update often does not, but work that moves plumbing or drainage, alters structure, or changes gas can trigger consent or restricted building work. We confirm what your project needs and handle consents where required. For your own home, check with an LBP or Auckland Council.